Rails

Aluminium rails
Various rails for the transportation market.

These aluminium profiles are used to give vehicles flexibility in flooring layout. Each rail has a track where seats and various tie-downs can be securely fitted in the vehicle. In other words, it's possible to move, add or remove equipment as needed. As an alternative to rails, we also have our full aluminium flooring solutions Innotrax and SpaceFloor.

rail_lowprofile_400x391.jpg

Low profile rail
Easy installation that can be recessed into the vehicle floor for a neat finish, with a height above the finishing floor of only 4 mm. Low profile rail requires M8 fasteners, fixed into countersunk holes at 101.6 mm intervals for a flush head finish. The low profile rail is available in different lengths up to 6m.

Learn more   

 
rail_surface_400x391.jpg

Surface rail
Designed for vehicles where flush-fitted rails are not possible, Surface rail is quick and easy to install into most vehicle floors, with a finished height of only 14 mm above the floor. Surface rail is a popular solution for 3rd point passenger restraint fitment (cant rail). The surface rail is available in different lengths up to 6m.

Learn more   

 
rail_heavyduty_400x459.jpg

Heavy duty rail
Heavy duty rail is specially designed to increase the structural integrity of the vehicle floor strength, it is the ideal choice for coach built conversions. The heavy duty rail is designed to be used with M8 steel bolt and is available in four different lengths. To further improve the versatility of the floor configuration, low profile rail can be fitted into heavy duty rails's side channels.

Learn more   

 
rail_campervan_400x247.jpg

Camper Van Kits
Our Camper Van Flooring Kits have been especially designed to meet most camper van needs and help you create that bespoke flooring layout. These rail kits are particularly suitable for the VW T4 & VW T5. When installed as per our written instructions, these Camper flooring kits meet with international safety standard requirements.

Learn more   

lowprofile_main-770x372.jpg

Low profile rail
Easy installation that can be recessed into the vehicle floor for a neat finish, with a height above the finishing floor of only 4 mm. Low profile rail requires M8 fasteners, fixed into countersunk holes at 101.6 mm intervals for a flush head finish.

The low profile rail is available in different lengths up to 6m and can be cut to length under special order.

Our rails can be machined, drilled, undrilled and unmachined as per converters requirements.

lowprofile_profile-770x414.jpg
Model Width Height Weight Length
Machined & drilled
LPRD36 46 mm 15.5 mm 0.933 kg/m 368 cm
LPRD45 46 mm 15.5 mm 0.933 kg/m 450 cm
LPRD50 46 mm 15.5 mm 0.933 kg/m 500 cm
Machined & undrilled
LPRF36 46 mm 15.5 mm 0.933 kg/m 368 cm
LPRF45 46 mm 15.5 mm 0.933 kg/m 450 cm
LPRF50 46 mm 15.5 mm 0.933 kg/m 500 cm
Unmachined & drilled
LPRB36 46 mm 15.5 mm 0.933 kg/m 368 cm
LPRB45 46 mm 15.5 mm 0.933 kg/m 450 cm
LPRB50 46 mm 15.5 mm 0.933 kg/m 500 cm
Unmachined & undrilled
LPRA36 46 mm 15.5 mm 0.933 kg/m 368 cm
LPRA45 46 mm 15.5 mm 0.933 kg/m 450 cm
LPRA50 46 mm 15.5 mm 0.933 kg/m 500 cm

Accessories

M8 fasteners
Mandatory on floor installations meeting M1 loads using Low Profile and Surface rails. Available in sets of 10 or 100.

Underfloor spreader plate
Useful for angled floor sections or where fitting a standard washer is difficult.

End caps
Provide a neat finish to the ends of fitted low profile rails. Available in an aluminium finish to match the rail or in yellow or grey plastic finish for a cost-effective solution.

Rail jig
Ensures perfect alignment during installation, avoiding fitment issues.

Rail insert
Protects the tracking from damage and debris. Use on tracking with scallops.

Rail trim
Protects the tracking from damage and debris. Use with any rail. It can easily slide into the rail central channel and can be cut to size.

surface_main-770x372.jpg

Surface rail
Designed for vehicles where flush-fitted rails are not possible, Surface rail is quick and easy to install into most vehicle floors, with a finished height of only 14 mm above the floor. Surface rail is a popular solution for 3rd point passenger restraint fitment (cant rail) and as a wall storage rail for unused equipment

Surface rail requires M8 fasteners, fixed into countersunk holes at 101.6mm intervals for a flush head finish. A 3.66m length of surface rail requires 37 fasteners. 

The surface rail is available in different lengths up to 6m and can be cut to length under special order.

Our rails can be machined, drilled, undrilled and unmachined as per converters requirements.

surface_profile-770x405.jpg
Model Width Height Weight Length
Machined & drilled
SRD36 42 mm 13.5 mm 0.8 kg/m 368 cm
SRD45 42 mm 13.5 mm 0.8 kg/m 450 cm
SRD50 42 mm 13.5 mm 0.8 kg/m 500 cm
Machined & undrilled
SRF36 42 mm 13.5 mm 0.8 kg/m 368 cm
SRF45 42 mm 13.5 mm 0.8 kg/m 450 cm
SRF50 42 mm 13.5 mm 0.8 kg/m 500 cm
Unmachined & drilled
SRB36 42 mm 13.5 mm 0.8 kg/m 368 cm
SRB45 42 mm 13.5 mm 0.8 kg/m 450 cm
SRB50 42 mm 13.5 mm 0.8 kg/m 500 cm
Unmachined & undrilled
SRA36 42 mm 13.5 mm 0.8 kg/m 368 cm
SRA45 42 mm 13.5 mm 0.8 kg/m 450 cm
SRA50 42 mm 13.5 mm 0.8 kg/m 500 cm

Accessories

M8 fasteners
Mandatory on floor installations meeting M1 loads using Low Profile and Surface rails. Available in sets of 10 or 100.

Underfloor spreader plate
Useful for angled floor sections or where fitting a standard washer is difficult.

End caps
Provide a neat finish to the ends of fitted surface rails. Available in an aluminium finish to match the rail or in yellow or grey plastic finish for a cost-effective solution.

Rail jig
Ensures perfect alignment during installation, avoiding fitment issues.

Rail insert
Protects the tracking from damage and debris. Use on tracking with scallops.

Rail trim
Protects the tracking from damage and debris. Use with any rail. It can easily slide into the rail central channel and can be cut to size.

heavyduty_main-770x372.jpg

Heavy duty rail
Heavy duty rail is specially designed to increase the structural integrity of the vehicle floor strength, it is the ideal choice for coach-built conversions. The heavy duty rail is designed to be used with M8 steel bolt and is available in four different lengths. 

Heavy Duty Rail offers greater flexibility with fewer fixing points. Fixings can be positioned at up to 600mm intervals to match vehicle frame chassis and reduce installation cost

To further improve the versatility of the floor configuration, low profile rail can be fitted into heavy duty rail’s side channels.

hdrail-plain_400x288.jpg
hdrail-installed_400x288.jpg
heavyduty_profile-770x388.jpg
Model Width Height Weight Length
Machined & undrilled
HDRF39 124 mm 38 mm 2.95 kg/m 390 cm
HDRF47 124 mm 38 mm 2.95 kg/m 470 cm
HDRF48 124 mm 38 mm 2.95 kg/m 480 cm
HDRF50 124 mm 38 mm 2.95 kg/m 500 cm

Accessories

M8 fasteners
Mandatory on floor installations meeting M1 loads using Low Profile and Surface rails. Available in sets of 10 or 100.

Underfloor spreader plate
Useful for angled floor sections or where fitting a standard washer is difficult.

Rail jig
Ensures perfect alignment during installation, avoiding fitment issues.

Rail insert
Protects the tracking from damage and debris. Use on tracking with scallops.

Rail trim
Protects the tracking from damage and debris. Use with any rail. It can easily slide into the rail central channel and can be cut to size.

campervankit_main-770x409.jpg

Camper van kits
Our Camper Van Flooring Kits have been especially designed to meet most camper van needs and help you create that bespoke flooring layout. These rail kits are particularly suitable for the VW T4 & VW T5. When installed as per our written instructions, these Camper flooring kits meet with international safety standard requirements.

Both our kits are available in either Low Profile rail, which is recessed into the vehicle floor for a neat finish or Surface Rail, which is surface mounted with a height of 14mm above the finished floor.

Kit 1 comprises:

  • 2 pieces of either drilled Low Profile Rail or drilled Surface Rail (1.84m each)
  • 38 M8 fastener sets which include steel screws, nyloc nuts and steel washers
  • 18 M8 underfloor spreader plates to ensure high level of safety
  • 4 metal end caps for a flush finish to the mounted floor
campervankit_cvlpkit1-500x308.jpg
campervankit_cvsrkit1-500x308.jpg

Kit 2 comprises:

  • 4 Standard Lockables to help you locate your seat in a safe position.
  • 2 pieces of either drilled Low Profile Rail or drilled Surface Rail (1.84m each)
  • 38 M8 fastener sets which include steel screws, nyloc nuts and steel washers
  • 18 M8 underfloor spreader plates to ensure high level of safety
  • 4 metal end caps for a flush finish to the mounted floor
campervankit_cvlpkit2-500x308.jpg
campervankit_cvsrkit2-500x308.jpg
 

Accessories

Rail insert
Protects the tracking from damage and debris. Use on tracking with scallops.

Rail trim
Protects the tracking from damage and debris. Use with any rail. It can easily slide into the rail central channel and can be cut to size.

Rail jig
Ensures perfect alignment during installation, avoiding fitment issues.

Accessories

End caps
Provide a neat finish to the ends of fitted low profile rails. Available in an aluminium finish to match the rail or in yellow or grey plastic finish for a cost-effective solution.

End caps
Provide a neat finish to the ends of fitted surface rails. Available in an aluminium finish to match the rail or in yellow or grey plastic finish for a cost-effective solution.

M8 fasteners
Mandatory on floor installations meeting M1 loads using Low Profile and Surface rails. Available in sets of 10 or 100.

Underfloor spreader plate
Useful for angled floor sections or where fitting a standard washer is difficult.

Rail pocket
Pocket with a short track inside. Fitted directly to the vehicle floor. Designed for WAVs. Available with and without cover.

Rail jig
Ensures perfect alignment during installation, avoiding fitment issues.

Rail insert
Protects the tracking from damage and debris. Use on tracking with scallops.

Rail trim
Protects the tracking from damage and debris. Use with any rail. It can easily slide into the rail central channel and can be cut to size.

 

Pour de plus amples informations, veuillez contacter nous.

  BraunAbility