Global website
English
Log in

Innotrax®

Picture 1:Aluminium rail Picture 2: aluminium floor installed in a car

Innotrax®
Bespoke aluminium flooring for vehicles.

This custom aluminium floor is delivered as part floor or as individual planks that easily click together. The floor is made up of various profiles, either tracks or spacers, to suit various needs. Innotrax® can be ordered as individual planks or made to order according to your specifications.

Innotrax plank

Innotrax®
By combining various planks, it is possible to tailor each floor to the desired specification. Installation is quick, simple and quality assured. In short, the Innotrax rails will always be perfectly parallel to each other.

Learn more   

 

Special Applications

Innotrax® Flat Floor
A complete flooring solution providing maximum seating spaces. Innotrax® Flat Floor’s key feature is the removal of the protruding rear wheel arches in the vehicle to maximise floor space for wheelchair-users and seated passengers. Innotrax® Flat Floor has been specifically tested for use in the Mercedes Sprinter, Volkswagen Crafter, Iveco Daily, Renault Master and Ford Transit. Innotrax® Flat Floor conforms to M2 vehicle test standards and complies with all current international standards and regulations.

Innotrax® Crew Cab
VCA has approved the use of Innotrax® flooring in Crew Cab vehicles. The Innotrax® section must contain at least two one metre length of rails and be installed as per our fitting instructions. Innotrax® Crew Cab is proven solution which helps create very robust floors quickly and easily. The floor system provides converters with enormous floor layout flexibility and is very cost effective. Innotrax® Crew Cab can be used in a wide range of vehicles. In certain seat configurations, some additional tests may be required.

Van with Innotrax flooring installed
Van with Innotrax flooring installed
Innotrax flooring planks in different sizes

Innotrax®
An Innotrax® floor is constructed from a range of aluminium planks that clicks together to form a floor layout. By combining various planks, it is possible to tailor each floor to the desired specification. Innotrax® is available as individual planks or as a whole floor, delivered in halves. Installation is quick, simple and quality assured. In short, the Innotrax® rails will always be perfectly parallel to each other. The finished floor is glued in place, making the entire vehicle strengthened and stabilized.

Innotrax® is fully compatible with a wide range of products and is tested to M1 standard. It offers certified approval for the most commonly used vehicle models. 

Please contact us for further information: sales@braunability.eu

  • Easy to install
  • Available in 3 different plank widths
  • Double rail plank available  
  • Flexible modular system
  • Suitable for individual adaptations or small series 
  • Sold as individual planks or pre-cut floor delivered in halves
  • Compatible with a wide range of tie-downs, seat fixtures and restraints
Innotrax flooring profiles in different sizes
Model Width Height Weight Lengths
Rail planks
R1 104 mm 41 mm 2.75 kg/m 258, 320, 380, 430, 470, 520 cm
R2 138 mm 41 mm 3.13 kg/m 258, 320, 380, 430, 470, 520 cm
R3 209 mm 41 mm 5.38 kg/m 258, 320, 380, 430, 470, 520 cm
Plain planks
P1 104 mm 35 mm 2.02 kg/m 258, 320, 380, 430, 470, 520 cm
P2 138 mm 35 mm 2.40 kg/m 258, 320, 380, 430, 470, 520 cm
Innotrax flooring in a flat floor solution

Innotrax® Flat Floor
Innotrax® Flat Floor allows vehicle converters to remove the protruding rear wheel arches, thus maximising space for both wheelchair-users and seated passengers. 

Innotrax® Flat Floor has been specifically tested for use in the Mercedes Sprinter, Volkswagen Crafter, Iveco Daily, Renault Master and Ford Transit. 

The floor is bonded on a 100mm raised platform to allow suspension clearance and provides a smooth and comfortable ride for every passenger.

Innotrax® Flat Floor can be ordered tailored to specifications. We offer a fully prepared floor service, including bespoke floor design, cut to shape and profile facility to give converters greater choices and cost-effective solutions.

Conforms to M2 vehicle test standards and complies with all current international standards and regulations.

With the removal of the wheel arch, vehicle suspension might require some adjustments.

Innotrax® Flat Floor is available machined, anodised or as an extrusion only.

Innotrax flooring profiles in different sizes
Model Width Height Weight Lengths
Rail planks
R1 104 mm 41 mm 2.75 kg/m 258, 320, 380, 430, 470, 520 cm
R2 138 mm 41 mm 3.13 kg/m 258, 320, 380, 430, 470, 520 cm
R3 209 mm 41 mm 5.38 kg/m 258, 320, 380, 430, 470, 520 cm
Plain planks
P1 104 mm 35 mm 2.02 kg/m 258, 320, 380, 430, 470, 520 cm
P2 138 mm 35 mm 2.40 kg/m 258, 320, 380, 430, 470, 520 cm
 

For more information and sales enquiries please contact us.

 BraunAbility

     
Find a local dealer